1. Choose the right gloves
Appropriate size: Make sure the latex gloves you choose are the right size for your hands. Gloves that are too tight will restrict hand movement, affect the flexibility of operation, and may also cause pressure on the hands; gloves that are too loose will easily fall off, reducing the protective effect.
Reliable quality: Choose latex gloves of good quality and that meet the standards. Check whether the gloves are damaged, defective or have odors, and avoid using products of substandard quality.
2. Correct wearing and removal
Preparation before wearing: Wash your hands and dry them before wearing latex gloves. Moisture or dirt on your hands may affect the fit and protective performance of the gloves.
Correct wearing method: Open the opening of the gloves, gently insert your fingers into the gloves, and then pull the gloves to the wrist to ensure that the gloves completely cover your hands. Be careful not to pull the gloves forcibly to avoid damaging the gloves.
Note when removing: When removing latex gloves, avoid direct contact with the outer surface of the gloves with your hands to avoid contaminating your hands. You can slowly roll up and take off the gloves from the wrist, and then put the gloves in the designated recycling container.
3. Avoid contact with harmful substances
Chemical substances: Latex gloves may have a certain tolerance to certain chemicals, but they may be corroded or damaged by strong corrosive chemicals such as strong acids, strong alkalis, and organic solvents. When contacting these chemicals, special protective gloves should be selected.
Sharp objects: Avoid latex gloves from contacting sharp objects, such as needles, blades, etc., to prevent the gloves from being punctured and losing their protective effect. When performing operations that may contact sharp objects, you can consider wearing double gloves or using other protective measures.
4. Pay attention to the use environment
Temperature: Latex gloves may become soft and deformed in a high temperature environment, reducing their protective performance. At the same time, a low temperature environment may make the gloves hard, brittle, and easy to crack. When using latex gloves, be careful to avoid using them in extreme temperatures.
Humidity: A high humidity environment may make latex gloves damp, affecting the comfort and protective performance of the gloves. When using gloves in a humid environment, be careful to replace dry gloves in time.
5. Check the gloves regularly
Appearance inspection: During use, regularly check the appearance of latex gloves to see if there are any damage, cracks, discoloration, etc. If you find that there is something wrong with the gloves, you should replace them in time.
Performance check: The protective performance of the gloves can be checked by a simple test, such as filling the gloves with water and observing whether there is any leakage. If the protective performance of the gloves decreases, they should be replaced immediately.
6. Pay attention to personal hygiene
Avoid cross-contamination: When using latex gloves, be careful to avoid cross-contamination between different items. For example, when contacting different patients or items, new gloves should be replaced.
Timely hand washing: After removing latex gloves, wash your hands with soap and water in time to keep your hands clean. Washing hands can remove harmful substances that may remain on your hands and reduce the risk of infection.
